The Model 1036-1 Water Control Unit by Mortech Manufacturing Inc. is Mortech's top of the line water control unit. Please specify left or right configuration. Tall filler spout designates side.
PLEASE NOTE: If your tank is on the left side, you will need to select a left side fill faucet, and if your tank is on the right side, you will need to select a right side fill faucet.
Tall Filler Spout for Embalming Machine
The tall faucet is designed for your embalming machine to fit under the spout. By using the master mixing valve, you can supply the desired temperature to the tank of your machine. The spout is easily turned out of the way when not in use.
Table Rinse
A serrated attachment is provided for quick connection of rinse hose. A constant flow of water can be supplied to the embalming table for cleaning or procedure purpose. The rinse is vacuum breaker protected for backflow prevention. Rinse Hose included.
Master Mixing Valves
Water temperature to the table rinse and tall faucet are easily controlled with the master mixing valves. Simply adjust lever until the desired temperature is archived.
Hydro-Aspirator Assembly
A hydro-aspirator with built-in vacuum breaker prevents contamination of your water supply. The clear sight drain also prevents contamination since the air gap will not allow aspirated material back into the aspirator assembly. A valve is provided to control water supply to the aspirator assembly. Included 10 ft./3 m. aspirator hose & 5 in./12 cm. draw hose.
Easy Installation
The entire unit is pre-assembled and pre plumbed for easy installation. Simply drop into the cutout in your countertop and connect the utility lines. The base plate is fabricated of heavy gauge stainless steel. Will install incounters as shallow as 18 in./45 cm. deep.
Also Included
- LW480 Aspirator - Deluxe hydro-aspirator with built-in vacuum breaker and control lever to be used to reverse the flow of water so as to direct it through the hose connections for either drawing fluid from the body cavity or rinsing a desired location. Fits most standard faucet threads. Fabricated from chrome plated brass.
- LW481 Extension - The hydro-aspirator extension is fabricated from chrome plated brass. It provides further safety against polluted backflow.
- LW482 Non-clogging Head - The Non-Clogging Aspirator Head prevents large debris from entering and clogging the system.
- Aspirator Hose - Quality clear vinyl tubing.
Technical Specs
- Manufacturer SKUs: 1036-1, 1036-1R (Right Side Fill Faucet), 1036-1L (Left Side Fill Faucet)
Shipping
Mortech's products usually ship in 4 to 6 weeks depending on availability. Please call us before ordering if you need to know a more accurate shipping date for this product.
Shipping Rate
Our website is unable to accurately calculate shipping rates for Mortech's products, so the $75.00 per unit shipping rate that appears during the checkout process for this product is only a "worst case scenario" estimate. Upon shipment of this product, your credit card will only be charged the actual shipping rate as provided by Mortech. If you need to know the actual shipping rate for this product before placing an order, please call us and we will be happy to get that information for you.
Sales Tax
Mortech Manufacturing requires us to collect state and/or local sales tax from our customers who purchase Mortech products and who are located in any of the following states: AR, AZ, CA, CT, GA, ID, IN, LA, MN, NC, OK, PA, SD, UT, WI. However, our website is unable to calculate sales tax per product per state. So, if you purchase any of Mortech's products and are located in any of the states listed, we will contact you with the sales tax that is due Mortech. You will be responsible for paying MortuaryMall.com any/all applicable state and/or local sales taxes prior to shipment by Mortech Manufacturing.
|